Injin Milling Linear
Don injin niƙan layi na kan layi, shine ingantattun kayan aiki don injinan yanar gizo saboda jikin haske da samfuri.
Kamar LM Series na injin milling na layi, zamu iya yin hannu daga 300mm har zuwa 3500mm har ma da ƙari gwargwadon halin da ake ciki a filin.
Don injin da muke amfani da shi akan sandar, yana iya zama NT40 ko NT50 tare da buƙatun yanke daban-daban.NT40 spindle wasa tare da yankan diamita 120mm, mafi 160mm tare da musamman.NT50 milling sandal ya zo da abin yanka na 200mm, har zuwa 25omm daidai.
Matsakaicin saurin 600-700rpm, motar tare da servo motor ko injin Hydraulic.
Motar Servo tana da ƙaramin akwatin sarrafawa, amma babban motar servo akan igiya.Yana da haske kwatanta da sauran iko.
Injin milling na layi ya dace da fakitin wutar lantarki mafi kyau, tashar wutar lantarki ta 18.5KW tana da ƙarfi da kwanciyar hankali.Amintaccen Mota yana ba da wutar lantarki gabaɗaya don aikin niƙan wurin.
| Y axis | 1000mm |
| Zaxis | 150mm ku |
| Y ciyarwa | Acin abinci |
| Z abinci | Da hannu |
| Y iko | Motar Lantarki, 380V, Mataki na 3, 50HZ |
| Milling head drive (Z) | Injin Ruwa, 380V, 3 Fase, 50HZ |
| Milling kai gudun | 0-590 |
| Yanke diamita | 120mm ku |
| Spindle | NT40 |
| nunin kai | High madaidaicin dijital caliper |
Duk wani buƙatu na kayan aikin injin niƙa, da fatan za a tuntuɓe mu kyauta.Za mu iya samar da keɓantaccen maganin milling na layi.
