LMB300 injin niƙa madaidaiciyabayani dalla-dalla:
| X Axis Stroke | 300mm (12 ″) |
| Y Axis Stroke | 100mm(4″) |
| Z Axis Stroke | Model 1: 100mm (4”;Misali 2:70mm (2.7”) |
| Ƙungiyar Ciyarwar Axis X/Y/Z | Ciyarwar Manual |
| Milling Spindle Head Taper | R8 |
| Rukunin Ƙarfin Ƙarfafawa na Head Drive: Motar Lantarki | Misali 1:2400W;Model 2:1200W |
| Spindel Head rpm | 0-1000 |
| Max Yankan Diamita | 50mm(2″) |
| Matsakaicin zurfin yanke kowane fasinja | 1 mm |
| Haɓaka daidaitawa (Yawan Ciyarwa) | 0.1mm, manual |
| Nau'in Shigarwa | Magnet |
| Nauyin Inji | 98kg |
| Nauyin jigilar kaya | 107Kg, 63x55x58cm |
Dongguan šaukuwa šaukuwa kayan aikin ƙira da kuma samar da abin dogara a kan-site milling inji, ciki har da gantry milling inji, mikakke milling inji, key yankan milling inji, šaukuwa surface milling inji, cnc thread milling inji, weld dutsen ado shavers milling inji.Dukkanin injunan an ƙera su tare da matsananciyar šaukuwa, ba tare da rasa ƙarfi ba, kusancin haƙuri akan sarrafa kayan aikin.
Cikakke don tsauraran mahalli da aikin gyara inda ba za a iya wargajewa ba, ana iya kulle injin mu masu ɗaukuwa, manne, ko magnetically a haɗe kai tsaye a kan kayan aikin kuma a saka shi a duk inda ake buƙata.
Kayan niƙan mu sun haɗa da injin niƙa, injin niƙa na layi, mai musayar zafi akan injunan rukunin yanar gizo, injin niƙa orbital, duk waɗannan madadin tattalin arziƙi ne don matsalolin niƙan ku akan wurin.Kowace na'ura tana da nau'i-nau'i a nasa dama, kuma yana ba da matakin daidaitawa wanda zai ba shi damar saduwa da kewayon jeri don yawancin buƙatun niƙa.
Injin milling na Gantry ya ƙunshi Y axis, X axis da axis Z.Duk girman yana da sassauƙa bisa ga halin da ake ciki.Muna ba da kayan aiki, da kuma shawarar sabis idan kuna buƙata.
LMB300 injin niƙa madaidaiciya, 3 axis šaukuwa a kan site line milling inji, samar da in situ sabis a kan site jobs, wanda isar da daidai daidai juriya tare da bitar.Ana iya hawa waɗannan na'ura mai miƙewa madaidaiciya akan kayan aikin tare da zaɓuɓɓuka daban-daban, gami da Magnetic na Dindindin ko bolting, sarƙar sarƙa da faranti na hadaya…
LMB300 šaukuwa na'ura milling inji za a iya motsa a kan X axis, Y axis da Z axis.X bugun jini na 300mm, bugun Y na 100-150mm, bugun Z don 100 ko 70mm.Za a iya keɓance girman jiki gwargwadon buƙatun ku.The milling spindle head taper tare da R8.Naúrar wutar lantarki tare da injin lantarki 2400W ko 1200W don rukunin tuƙi.Wannan injin niƙa ne da hannu, ana amfani da shi don ƙayyadaddun ɗaki da sarari tare da nauyi mai ɗaukuwa don ayyukan niƙan wurin.Ciki har da aske walda a bango ko a bene.
A kan na'ura mai niƙa an ƙera shi don aiwatar da aikace-aikacen niƙa da yawa a cikin wurin, yana da matuƙar dacewa, gami da masu musayar zafi, famfo da fakitin mota, injin niƙa na ƙarfe, ginin jirgin ruwa, layukan tsaga na turbine.
Duk wani bukatu, don Allahtuntube mu sales@portable-tools.comkyauta
